| AVR Libc Home Page |  |
AVR Libc Development Pages | ||
| Main Page | FAQ | Library Reference | Additional Documentation | Example Projects |
| AVR Libc Home Page | |
AVR Libc Development Pages | ||
| Main Page | FAQ | Library Reference | Additional Documentation | Example Projects |
uint8_t flag; ... ISR(SOME_vect) { flag = 1; } ... while (flag == 0) { ... }
the compiler will typically access flag only once, and optimize further accesses completely away, since its code path analysis shows that nothing inside the loop could change the value of flag anyway. To tell the compiler that this variable could be changed outside the scope of its code path analysis (e. g. from within an interrupt routine), the variable needs to be declared like:
volatile uint8_t flag;
Back to FAQ Index.
<math.h>, the linker needs to be told to also link the mathematical library, libm.a.
Typically, system libraries like libm.a are given to the final C compiler command line that performs the linking step by adding a flag -lm at the end. (That is, the initial lib and the filename suffix from the library are written immediately after a -l flag. So for a libfoo.a library, -lfoo needs to be provided.) This will make the linker search the library in a path known to the system.
An alternative would be to specify the full path to the libm.a file at the same place on the command line, i. e. after all the object files (*.o). However, since this requires knowledge of where the build system will exactly find those library files, this is deprecated for system libraries.
Back to FAQ Index.
register unsigned char counter asm("r3");
Typically, it should be possible to use r2 through r15 that way.
See C Names Used in Assembler Code for more details.
Back to FAQ Index.
MCUCR, WDTCR or anything else) is different (and more flexible) in the current version. Basically, write a small assembler file which looks like this:
;; begin xram.S #include <avr/io.h> .section .init1,"ax",@progbits ldi r16,_BV(SRE) | _BV(SRW) out _SFR_IO_ADDR(MCUCR),r16 ;; end xram.S
Assemble it, link the resulting xram.o with other files in your program, and this piece of code will be inserted in initialization code, which is run right after reset. See the linker script for comments about the new .initN sections (which one to use, etc.).
The advantage of this method is that you can insert any initialization code you want (just remember that this is very early startup -- no stack and no __zero_reg__ yet), and no program memory space is wasted if this feature is not used.
There should be no need to modify linker scripts anymore, except for some very special cases. It is best to leave __stack at its default value (end of internal SRAM -- faster, and required on some devices like ATmega161 because of errata), and add -Wl,-Tdata,0x801100 to start the data section above the stack.
For more information on using sections, see Memory Sections. There is also an example for Using Sections in C Code. Note that in C code, any such function would preferrably be placed into section .init3 as the code in .init2 ensures the internal register __zero_reg__ is already cleared.
Back to FAQ Index.
SBI() instruction), so the definitions cannot usefully be made as byte values in the first place.
So in order to access a particular bit number as a byte value, use the _BV() macro. Of course, the implementation of this macro is just the usual bit shift (which is done by the compiler anyway, thus doesn't impose any run-time penalty), so the following applies:
_BV(3) => 1 << 3 => 0x08
However, using the macro often makes the program better readable.
"BV" stands for "bit value", in case someone might ask you. :-)
Example: clock timer 2 with full IO clock (CS2x = 0b001), toggle OC2 output on compare match (COM2x = 0b01), and clear timer on compare match (CTC2 = 1). Make OC2 (PD7) an output.
Back to FAQ Index.
avr-c++.
However, there's currently no support for libstdc++, the standard support library needed for a complete C++ implementation. This imposes a number of restrictions on the C++ programs that can be compiled. Among them are:
new and delete are not implemented, attempting to use them will cause the linker to complain about undefined external references. (This could perhaps be fixed.)
extern "C" { . . . }
-fno-exceptions in the compiler options. Failing this, the linker will complain about an undefined external reference to __gxx_personality_sj0.Constructors and destructors are supported though, including global ones.
When programming C++ in space- and runtime-sensitive environments like microcontrollers, extra care should be taken to avoid unwanted side effects of the C++ calling conventions like implied copy constructors that could be called upon function invocation etc. These things could easily add up into a considerable amount of time and program memory wasted. Thus, casual inspection of the generated assembler code (using the -S compiler option) seems to be warranted.
Back to FAQ Index.
avr-gcc does this by placing the appropriate code into section As long as these variables are not initialized (i. e. they don't have an equal sign and an initialization expression to the right within the definition of the variable), they go into the .bss section of the file. This section simply records the size of the variable, but otherwise doesn't consume space, neither within the object file nor within flash memory. (Of course, being a variable, it will consume space in the target's SRAM.)
In contrast, global and static variables that have an initializer go into the .data section of the file. This will cause them to consume space in the object file (in order to record the initializing value), and in the flash ROM of the target device. The latter is needed since the flash ROM is the only way that the compiler can tell the target device the value this variable is going to be initialized to.
Now if some programmer "wants to make doubly sure" their variables really get a 0 at program startup, and adds an initializer just containing 0 on the right-hand side, they waste space. While this waste of space applies to virtually any platform C is implemented on, it's usually not noticeable on larger machines like PCs, while the waste of flash ROM storage can be very painful on a small microcontroller like the AVR.
So in general, variables should only be explicitly initialized if the initial value is non-zero.
TCNTn), the input capture register (ICRn), and write access to the output compare registers (OCRnM). Refer to the actual datasheet for each device's set of registers that involves the TEMP register.When accessing one of the registers that use TEMP from the main application, and possibly any other one from within an interrupt routine, care must be taken that no access from within an interrupt context could clobber the TEMP register data of an in-progress transaction that has just started elsewhere.
To protect interrupt routines against other interrupt routines, it's usually best to use the ISR() macro when declaring the interrupt function, and to ensure that interrupts are still disabled when accessing those 16-bit timer registers.
Within the main program, access to those registers could be encapsulated in calls to the cli() and sei() macros. If the status of the global interrupt flag before accessing one of those registers is uncertain, something like the following example code can be used.
uint16_t read_timer1(void) { uint8_t sreg; uint16_t val; sreg = SREG; cli(); val = TCNT1; SREG = sreg; return val; }
Back to FAQ Index.
asm volatile("sbi 0x18,0x07;");
Which works. When you do the same thing but replace the address of the port by its macro name, like this:
asm volatile("sbi PORTB,0x07;");
you get a compilation error: "Error: constant value required".
PORTB is a precompiler definition included in the processor specific file included in avr/io.h. As you may know, the precompiler will not touch strings and PORTB, instead of 0x18, gets passed to the assembler. One way to avoid this problem is:
asm volatile("sbi %0, 0x07" : "I" (_SFR_IO_ADDR(PORTB)):);
PORTB |= (1 << 7). The optimizer will take care to transform this into a single SBI instruction, assuming the operands allow for this.-O) and debug information (-g) which is fortunately possible in avr-gcc, the code watched in the debugger is optimized code. While it is not guaranteed, very often this code runs with the exact same optimizations as it would run without the -g switch.
This can have unwanted side effects. Since the compiler is free to reorder code execution as long as the semantics do not change, code is often rearranged in order to make it possible to use a single branch instruction for conditional operations. Branch instructions can only cover a short range for the target PC (-63 through +64 words from the current PC). If a branch instruction cannot be used directly, the compiler needs to work around it by combining a skip instruction together with a relative jump (rjmp) instruction, which will need one additional word of ROM.
Another side effect of optimzation is that variable usage is restricted to the area of code where it is actually used. So if a variable was placed in a register at the beginning of some function, this same register can be re-used later on if the compiler notices that the first variable is no longer used inside that function, even though the variable is still in lexical scope. When trying to examine the variable in avr-gdb, the displayed result will then look garbled.
So in order to avoid these side effects, optimization can be turned off while debugging. However, some of these optimizations might also have the side effect of uncovering bugs that would otherwise not be obvious, so it must be noted that turning off optimization can easily change the bug pattern. In most cases, you are better off leaving optimizations enabled while debugging.
Back to FAQ Index.
-g compiler option, avr-gcc only generates line number and other debug information for C (and C++) files that pass the compiler. Functions that don't have line number information will be completely skipped by a single step command in gdb. This includes functions linked from a standard library, but by default also functions defined in an assembler source file, since the -g compiler switch does not apply to the assembler.
So in order to debug an assembler input file (possibly one that has to be passed through the C preprocessor), it's the assembler that needs to be told to include line-number information into the output file. (Other debug information like data types and variable allocation cannot be generated, since unlike a compiler, the assembler basically doesn't know about this.) This is done using the (GNU) assembler option --gstabs.
Example:
$ avr-as -mmcu=atmega128 --gstabs -o foo.o foo.s
When the assembler is not called directly but through the C compiler frontend (either implicitly by passing a source file ending in .S, or explicitly using -x assembler-with-cpp), the compiler frontend needs to be told to pass the --gstabs option down to the assembler. This is done using -Wa,--gstabs. Please take care to only pass this option when compiling an assembler input file. Otherwise, the assembler code that results from the C compilation stage will also get line number information, which confuses the debugger.
-Wa,-gstabs since the compiler will add the extra '-' for you.
$ EXTRA_OPTS="-Wall -mmcu=atmega128 -x assembler-with-cpp"
$ avr-gcc -Wa,--gstabs ${EXTRA_OPTS} -c -o foo.o foo.S
Also note that the debugger might get confused when entering a piece of code that has a non-local label before, since it then takes this label as the name of a new function that appears to have been entered. Thus, the best practice to avoid this confusion is to only use non-local labels when declaring a new function, and restrict anything else to local labels. Local labels consist just of a number only. References to these labels consist of the number, followed by the letter b for a backward reference, or f for a forward reference. These local labels may be re-used within the source file, references will pick the closest label with the same number and given direction.
Example:
myfunc: push r16
push r17
push r18
push YL
push YH
...
eor r16, r16 ; start loop
ldi YL, lo8(sometable)
ldi YH, hi8(sometable)
rjmp 2f ; jump to loop test at end
1: ld r17, Y+ ; loop continues here
...
breq 1f ; return from myfunc prematurely
...
inc r16
2: cmp r16, r18
brlo 1b ; jump back to top of loop
1: pop YH
pop YL
pop r18
pop r17
pop r16
ret
Back to FAQ Index.
#include <inttypes.h> #include <avr/io.h> void set_bits_func_wrong (volatile uint8_t port, uint8_t mask) { port |= mask; } void set_bits_func_correct (volatile uint8_t *port, uint8_t mask) { *port |= mask; } #define set_bits_macro(port,mask) ((port) |= (mask)) int main (void) { set_bits_func_wrong (PORTB, 0xaa); set_bits_func_correct (&PORTB, 0x55); set_bits_macro (PORTB, 0xf0); return (0); }
The first function will generate object code which is not even close to what is intended. The major problem arises when the function is called. When the compiler sees this call, it will actually pass the value of the PORTB register (using an IN instruction), instead of passing the address of PORTB (e.g. memory mapped io addr of 0x38, io port 0x18 for the mega128). This is seen clearly when looking at the disassembly of the call:
set_bits_func_wrong (PORTB, 0xaa); 10a: 6a ea ldi r22, 0xAA ; 170 10c: 88 b3 in r24, 0x18 ; 24 10e: 0e 94 65 00 call 0xca
So, the function, once called, only sees the value of the port register and knows nothing about which port it came from. At this point, whatever object code is generated for the function by the compiler is irrelevant. The interested reader can examine the full disassembly to see that the function's body is completely fubar.
The second function shows how to pass (by reference) the memory mapped address of the io port to the function so that you can read and write to it in the function. Here's the object code generated for the function call:
set_bits_func_correct (&PORTB, 0x55); 112: 65 e5 ldi r22, 0x55 ; 85 114: 88 e3 ldi r24, 0x38 ; 56 116: 90 e0 ldi r25, 0x00 ; 0 118: 0e 94 7c 00 call 0xf8
You can clearly see that 0x0038 is correctly passed for the address of the io port. Looking at the disassembled object code for the body of the function, we can see that the function is indeed performing the operation we intended:
void
set_bits_func_correct (volatile uint8_t *port, uint8_t mask)
{
f8: fc 01 movw r30, r24
*port |= mask;
fa: 80 81 ld r24, Z
fc: 86 2b or r24, r22
fe: 80 83 st Z, r24
}
100: 08 95 ret
Notice that we are accessing the io port via the LD and ST instructions.
The port parameter must be volatile to avoid a compiler warning.
IN and OUT assembly instructions, they can not be used inside the function when passing the port in this way. Readers interested in the details should consult the Instruction Set data sheet.
set_bits_macro (PORTB, 0xf0); 11c: 88 b3 in r24, 0x18 ; 24 11e: 80 6f ori r24, 0xF0 ; 240 120: 88 bb out 0x18, r24 ; 24
Of course, in a real application, you might be doing a lot more in your function which uses a passed by reference io port address and thus the use of a function over a macro could save you some code space, but still at a cost of execution speed.
Care should be taken when such an indirect port access is going to one of the 16-bit IO registers where the order of write access is critical (like some timer registers). All versions of avr-gcc up to 3.3 will generate instructions that use the wrong access order in this situation (since with normal memory operands where the order doesn't matter, this sometimes yields shorter code).
See http://mail.nongnu.org/archive/html/avr-libc-dev/2003-01/msg00044.html for a possible workaround.
avr-gcc versions after 3.3 have been fixed in a way where this optimization will be disabled if the respective pointer variable is declared to be volatile, so the correct behaviour for 16-bit IO ports can be forced that way.
Back to FAQ Index.
char is 8 bits, int is 16 bits, long is 32 bits, long long is 64 bits, float and double are 32 bits (this is the only supported floating point format), pointers are 16 bits (function pointers are word addresses, to allow addressing the whole 128K program memory space on the ATmega devices with > 64 KB of flash ROM). There is a -mint8 option (see Options for the C compiler avr-gcc) to make int 8 bits, but that is not supported by avr-libc and violates C standards (int must be at least 16 bits). It may be removed in a future release.
r0 - temporary register, can be clobbered by any C code (except interrupt handlers which save it), may be used to remember something for a while within one piece of assembler code
r1 - assumed to be always zero in any C code, may be used to remember something for a while within one piece of assembler code, but must then be cleared after use (clr r1). This includes any use of the [f]mul[s[u]] instructions, which return their result in r1:r0. Interrupt handlers save and clear r1 on entry, and restore r1 on exit (in case it was non-zero).
char, have one free register above them). This allows making better use of the movw instruction on the enhanced core. If too many, those that don't fit are passed on the stack.
Return values: 8-bit in r24 (not r25!), 16-bit in r25:r24, up to 32 bits in r22-r25, up to 64 bits in r18-r25. 8-bit return values are zero/sign-extended to 16 bits by the caller (unsigned char is more efficient than signed char - just clr r25). Arguments to functions with variable argument lists (printf etc.) are all passed on stack, and char is extended to int.
#include <avr/pgmspace.h> PGM_P array[2] PROGMEM = { "Foo", "Bar" }; int main (void) { char buf[32]; strcpy_P (buf, array[1]); return 0; }
The result is not what you want though. What you end up with is the array stored in ROM, while the individual strings end up in RAM (in the .data section).
To work around this, you need to do something like this:
#include <avr/pgmspace.h> const char foo[] PROGMEM = "Foo"; const char bar[] PROGMEM = "Bar"; PGM_P array[2] PROGMEM = { foo, bar }; int main (void) { char buf[32]; PGM_P p; int i; memcpy_P(&p, &array[i], sizeof(PGM_P)); strcpy_P(buf, p); return 0; }
Looking at the disassembly of the resulting object file we see that array is in flash as such:
00000026 <array>: 26: 2e 00 .word 0x002e ; ???? 28: 2a 00 .word 0x002a ; ???? 0000002a <bar>: 2a: 42 61 72 00 Bar. 0000002e <foo>: 2e: 46 6f 6f 00 Foo.
foo is at addr 0x002e.
bar is at addr 0x002a.
array is at addr 0x0026.
Then in main we see this:
memcpy_P(&p, &array[i], sizeof(PGM_P)); 70: 66 0f add r22, r22 72: 77 1f adc r23, r23 74: 6a 5d subi r22, 0xDA ; 218 76: 7f 4f sbci r23, 0xFF ; 255 78: 42 e0 ldi r20, 0x02 ; 2 7a: 50 e0 ldi r21, 0x00 ; 0 7c: ce 01 movw r24, r28 7e: 81 96 adiw r24, 0x21 ; 33 80: 08 d0 rcall .+16 ; 0x92
This code reads the pointer to the desired string from the ROM table array into a register pair.
The value of i (in r22:r23) is doubled to accomodate for the word offset required to access array[], then the address of array (0x26) is added, by subtracting the negated address (0xffda). The address of variable p is computed by adding its offset within the stack frame (33) to the Y pointer register, and memcpy_P is called.
strcpy_P(buf, p); 82: 69 a1 ldd r22, Y+33 ; 0x21 84: 7a a1 ldd r23, Y+34 ; 0x22 86: ce 01 movw r24, r28 88: 01 96 adiw r24, 0x01 ; 1 8a: 0c d0 rcall .+24 ; 0xa4
This will finally copy the ROM string into the local buffer buf.
Variable p (located at Y+33) is read, and passed together with the address of buf (Y+1) to strcpy_P. This will copy the string from ROM to buf.
Note that when using a compile-time constant index, omitting the first step (reading the pointer from ROM via memcpy_P) usually remains unnoticed, since the compiler would then optimize the code for accessing array at compile-time.
Back to FAQ Index.
Basically, the bit SRE (SRAM enable) in the MCUCR register needs to be set in order to enable the external memory interface. Depending on the device to be used, and the application details, further registers affecting the external memory operation like XMCRA and XMCRB, and/or further bits in MCUCR might be configured. Refer to the datasheet for details.
If the external RAM is going to be used to store the variables from the C program (i. e., the .data and/or .bss segment) in that memory area, it is essential to set up the external memory interface early during the device initialization so the initialization of these variable will take place. Refer to How to modify MCUCR or WDTCR early? for a description how to do this using few lines of assembler code, or to the chapter about memory sections for an example written in C.
The explanation of malloc() contains a discussion about the use of internal RAM vs. external RAM in particular with respect to the various possible locations of the heap (area reserved for malloc()). It also explains the linker command-line options that are required to move the memory regions away from their respective standard locations in internal RAM.
Finally, if the application simply wants to use the additional RAM for private data storage kept outside the domain of the C compiler (e. g. through a char * variable initialized directly to a particular address), it would be sufficient to defer the initialization of the external RAM interface to the beginning of main(), so no tweaking of the .init3 section is necessary. The same applies if only the heap is going to be located there, since the application start-up code does not affect the heap.
It is not recommended to locate the stack in external RAM. In general, accessing external RAM is slower than internal RAM, and errata of some AVR devices even prevent this configuration from working properly at all.
Back to FAQ Index.
-O option might automatically cause "better" optimization. First, there's no universal definition for "better", with optimization often being a speed vs. code size tradeoff. See the detailed discussion for which option affects which part of the code generation.A test case was run on an ATmega128 to judge the effect of compiling the library itself using different optimization levels. The following table lists the results. The test case consisted of around 2 KB of strings to sort. Test #1 used qsort() using the standard library strcmp(), test #2 used a function that sorted the strings by their size (thus had two calls to strlen() per invocation).
When comparing the resulting code size, it should be noted that a floating point version of fvprintf() was linked into the binary (in order to print out the time elapsed) which is entirely not affected by the different optimization levels, and added about 2.5 KB to the code.
| Optimization flags | Size of .text | Time for test #1 | Time for test #2 |
| -O3 | 6898 | 903 µs | 19.7 ms |
| -O2 | 6666 | 972 µs | 20.1 ms |
| -Os | 6618 | 955 µs | 20.1 ms |
| -Os -mcall-prologues | 6474 | 972 µs | 20.1 ms |
(The difference between 955 µs and 972 µs was just a single timer-tick, so take this with a grain of salt.)
So generally, it seems -Os -mcall-prologues is the most universal "best" optimization level. Only applications that need to get the last few percent of speed benefit from using -O3.
Back to FAQ Index.
__attribute__ ((section (".bootloader")))
In this example, .bootloader is the name of the new section. This attribute needs to be placed after the prototype of any function to force the function into the new section.
void boot(void) __attribute__ ((section (".bootloader")));
To relocate the section to a fixed address the linker flag --section-start is used. This option can be passed to the linker using the -Wl compiler option:
-Wl,--section-start=.bootloader=0x1E000
The name after section-start is the name of the section to be relocated. The number after the section name is the beginning address of the named section.
Back to FAQ Index.
JTAGEN fuse programmed by default. This will make the respective port pins that are used for the JTAG interface unavailable for regular IO.Back to FAQ Index.
That way, any string literal will be a valid argument to any C function that expects a const char * argument.
Of course, this is going to waste a lot of SRAM. In Program Space String Utilities, a method is described how such constant data can be moved out to flash ROM. However, a constant string located in flash ROM is no longer a valid argument to pass to a function that expects a const char *-type string, since the AVR processor needs the special instruction LPM to access these strings. Thus, separate functions are needed that take this into account. Many of the standard C library functions have equivalents available where one of the string arguments can be located in flash ROM. Private functions in the applications need to handle this, too. For example, the following can be used to implement simple debugging messages that will be sent through a UART:
#include <inttypes.h> #include <avr/io.h> #include <avr/pgmspace.h> int uart_putchar(char c) { if (c == '\n') uart_putchar('\r'); loop_until_bit_is_set(USR, UDRE); UDR = c; return 0; /* so it could be used for fdevopen(), too */ } void debug_P(const char *addr) { char c; while ((c = pgm_read_byte(addr++))) uart_putchar(c); } int main(void) { ioinit(); /* initialize UART, ... */ debug_P(PSTR("foo was here\n")); return 0; }
To work around this use typecasts on the operands, including literals, to declare that the values are to be 8 bit operands.
This may be especially important when clearing a bit:
var &= ~mask; /* wrong way! */
The bitwise "not" operator (~) will also promote the value in mask to an int. To keep it an 8-bit value, typecast before the "not" operator:
var &= (unsigned char)~mask;
Back to FAQ Index.
avr-nm on your output (ELF) file. Run it with the -n option, and it will sort the symbols numerically (by default, they are sorted alphabetically).
Look for the symbol _end, that's the first address in RAM that is not allocated by a variable. (avr-gcc internally adds 0x800000 to all data/bss variable addresses, so please ignore this offset.) Then, the run-time initialization code initializes the stack pointer (by default) to point to the last avaialable address in (internal) SRAM. Thus, the region between _end and the end of SRAM is what is available for stack. (If your application uses malloc(), which e. g. also can happen inside printf(), the heap for dynamic memory is also located there. See Using malloc().)
The amount of stack required for your application cannot be determined that easily. For example, if you recursively call a function and forget to break that recursion, the amount of stack required is infinite. :-) You can look at the generated assembler code (avr-gcc ... -S), there's a comment in each generated assembler file that tells you the frame size for each generated function. That's the amount of stack required for this function, you have to add up that for all functions where you know that the calls could be nested.
Back to FAQ Index.
Bruce D. Lightner wrote an excellent description of how to do this, and offers this together with a toolkit on his web page:
http://lightner.net/avr/ATtinyAvrGcc.html
Back to FAQ Index.
make sees a "file coming from the future".Since all make decisions are based on file timestamps, and their dependencies, make warns about this situation.
Solution: don't use inferior file systems / operating systems. Neither Unix file systems nor HPFS (aka NTFS) do experience that problem.
Workaround: after saving the file, wait a second before starting make. Or simply ignore the warning. If you are paranoid, execute a make clean all to make sure everything gets rebuilt.
In networked environments where the files are accessed from a file server, this message can also happen if the file server's clock differs too much from the network client's clock. In this case, the solution is to use a proper time keeping protocol on both systems, like NTP. As a workaround, synchronize the client's clock frequently with the server's clock.
Back to FAQ Index.
From the hardware's point of view, an interrupt is asserted as long as the respective bit is set, while global interrupts are enabled. Thus, it is essential to have the bit cleared before interrupts get re-enabled again (which usually happens when returning from an interrupt handler).
Only few subsystems require an explicit action to clear the interrupt request when using interrupt handlers. (The notable exception is the TWI interface, where clearing the interrupt indicates to proceed with the TWI bus hardware handshake, so it's never done automatically.)
However, if no normal interrupt handlers are to be used, or in order to make extra sure any pending interrupt gets cleared before re-activating global interrupts (e. g. an external edge-triggered one), it can be necessary to explicitly clear the respective hardware interrupt bit by software. This is usually done by writing a logical 1 into this bit position. This seems to be illogical at first, the bit position already carries a logical 1 when reading it, so why does writing a logical 1 to it clear the interrupt bit?
The solution is simple: writing a logical 1 to it requires only a single OUT instruction, and it is clear that only this single interrupt request bit will be cleared. There is no need to perform a read-modify-write cycle (like, an SBI instruction), since all bits in these control registers are interrupt bits, and writing a logical 0 to the remaining bits (as it is done by the simple OUT instruction) will not alter them, so there is no risk of any race condition that might accidentally clear another interrupt request bit. So instead of writing
TIFR |= _BV(TOV0); /* wrong! */
simply use
TIFR = _BV(TOV0);
Back to FAQ Index.
Back to FAQ Index.
Back to FAQ Index.
/* prologue: frame size=20 */ push r28 push r29 in r28,__SP_L__ in r29,__SP_H__ sbiw r28,20 in __tmp_reg__,__SREG__ cli out __SP_H__,r29 out __SREG__,__tmp_reg__ out __SP_L__,r28 /* prologue end (size=10) */
It reads the current stack pointer value, decrements it by the required amount of bytes, then disables interrupts, writes back the high part of the stack pointer, writes back the saved SREG (which will eventually re-enable interrupts if they have been enabled before), and finally writes the low part of the stack pointer.
At the first glance, there's a race between restoring SREG, and writing SPL. However, after enabling interrupts (either explicitly by setting the I flag, or by restoring it as part of the entire SREG), the AVR hardware executes (at least) the next instruction still with interrupts disabled, so the write to SPL is guaranteed to be executed with interrupts disabled still. Thus, the emitted sequence ensures interrupts will be disabled only for the minimum time required to guarantee the integrity of this operation.
Back to FAQ Index.
Which one of the five linker script files is actually used depends on command line options given to ld.
A .x script file is the default script A .xr script is for linking without relocation (-r flag) A .xu script is like .xr but *do* create constructors (-Ur flag) A .xn script is for linking with -n flag (mix text and data on same page). A .xbn script is for linking with -N flag (mix text and data on same page).
Back to FAQ Index.